Traditional docking stations are only designed to test one instrument at a time, resulting in time consuming testing periods as well as unnecessary usage of testing gas.
Gas Clip Technologies has significantly improved both testing time and test gas usage with the SGC Dock; users can now test 4 instruments simultaneously saving both time and money.
In order to keep your fleet of gas detectors compliant with specific settings, we allow for the SGC Dock to program each unit during either bump testing or calibration.
The programmable fields are as follows: User ID, Calibration Interval, Bump Interval, Self-Test Interval, Low Alarm, High Alarm, Show Sensor Readings, Hide Bump Due LED and Hide Clock.
For example, if your company or facility requires each detector on site to have specific alarm set points and a bump test interval, instead of programming each unit individually, the instruments can be group programmed while simultaneously bump testing (4 units at a time per dock) using our GCT Manager software.
As firmware updates become available, we can program each SGC Dock to update units during bump testing and calibration.
Facility safety standard compliance for single gas detectors is now easily achievable.
Event Data and Record Storage:
In addition to performing tests, unit configurations and firmware updates, the SGC Dock also stores important information about both the docking station and units tested.
All tests performed on the docking station can be accessed from either the USB directly or using the GCT Manager software.
Each bump test and calibration event is recorded and logged by date, time and serial number.
Along with the test records, the individual event logs from each unit are saved.
At the time of the test, the detector transmits its’ event log to the memory.
By default, the station will save the previous 10 event logs.
Wall Mount SGC Dock:
Gas Clip Technologies offers a wall mount solution for our SGC Dock.
This option can be selected at the time of order or can be ordered separately to convert your existing SGC Dock to a Wall Mount SGC.
This option is a perfect fit for facilities or office environments.
*Wall Mount SGC Dock is not pictured
GCT Manager software:
Gas Clip Technologies GCT Manager software provides users the ability to communicate and program the SGC Dock or Wall Mount SGC Dock via IR Link or USB memory stick.
In order to communicate with a SGC Dock via infrared, an IR Linkis required.
Following is a full list of programmable features offered when communicating with the SGC Dock or Wall Mount SGC Dock using the GCT Manager Software via the IR Link:
Certifications & Approvals: See attached Datasheet.
Information Stored: Bump/Calibration Logs, Individual monitor event logs, Firmware and Unit Configurations
Gases Available: LEL, H2S, CO, O2
Unit Compatibility: Works with all SGC and SGC Plus monitors
Calibration Gas: Compatible with 58L or 116L cylinders; Docks also available in a High Volume/High Pressure model
WARNING - This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
